Description
Benefits:
Innovative Impulse Technology system for controlling the drying capacity through impulse adjustment of the refrigerant liquid flow or due to the thermal mass effect;
Compact 3-in-1 aluminum heat exchanger with optimized perfect countercurrent heat exchange and a stainless steel condensate separator.
Minimal load losses (average 0.09 bar) due to fluid dynamic optimization and extensive transfer sections;
Constant dew point under all working conditions.
The Impulse Technology energy-saving technology, as well as the use of ecologically friendly refrigerants R134a and R410A, have a low environmental impact and reduce carbon dioxide emissions.
The power supply for models 101-165-190-230-270-320 is dual frequency and available in UL508A version with 115V/1/60Hz, 230V/1/60Hz, 230V/3/60Hz, and 460V/3/60Hz options, depending on the model.
Quick and simple installation;
Simplified maintenance.
Highest dependability.
Technical Specifications:
Structure in carbon steel sheeting, hot coated with RAL7035 epoxy powder.
Environmentally friendly liquid refrigerants, R134a and R410A;
Hermetic piston/rotary compressors and high energy efficiency scrolls;
New compact three-in-one aluminum heat exchanger with high energy efficiency and reduced load losses.
Tubeless condenser with steel fins shielded by a double layer of immersion painting (DEiT 003 – 032).
Finned batteries with copper pipes and generously dimensioned aluminum fins (DEiT 040-320);
DEiT 101-320 models use standard condenser filters, axial fans, and rolling capillaries.
New DEC microprocessor control with energy savings level display, equipped with numerous parameters and alerts such as excessive temperature, low temperature, temperature probe failure, etc.
The system includes a general alarm dry contact, a remote ON/OFF dry contact, a programmable condensate discharger, a phase monitor, and a compressor crankcase heater (DEiT 165-320).
The maximum ambient temperature is +50°C, the maximum working pressure is 16 barg, and the degree of electrical protection is IP22.
Accessories & Kits:
Zero-loss capacitive condensate drain.
Timed/capacitive drain conversion kit;
Monitoring system RS485.
