END SUCTION PUMPS

Magnetic Drive Process Pump - ROMAK

Our Romak process pumps are designed to handle a variety of CLEAR and CLEAN chemical liquids with leak-free conveyance. These pumps are rigidly constructed and made with close tolerances. The Romak (RMK) pump is a magnetically driven pump.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

FEATURES

Pump with no seals or glands
Magnetic drive pumps have permanent magnets.
Zero leakage
Designed according to ISO 2858/DIN EN 22858/ISO 5199 standards.

SPECIFICATIONS

Delivery size: up to 100 mm
Capacity up to 300 m3/hour
Head up to 150 meters.
Speed: 2900, 1450, and 980 rpm at 50 Hz; 3500, 1750, and 1150 rpm at 60 Hz.
Temperature ranges from (-)50° to 180° Celsius.

APPLICATIONS

Chemicals include paints, solvents, intermediates, resin, polymers, and other acidic and basic substances.
Pharmaceuticals
Petrochemicals
Suitable for various process industries for clean/clear liquids with no suspended particles.

Material of Construction (MOC)

Pump casting, casing cover, wear ring, and impeller shaft are composed of stainless steel and tested according to ASTM A351 M-CF8M.
The pump shaft is built of stainless steel and tested according to ASTM A276, Type 316, and 316L. Other materials of construction (MOC) possibilities include ASTM A890/890M CD4MCuN-1B Duplex, Alloy ASTM B473 UNS8020, and ASTM A494 Hastelloy B.

GO TO:

End Suction Process Pump - GK(P)

Our pumps are used to handle a variety of chemical liquids. These pumps are rigidly constructed and made with close tolerances. GK(P) pumps are mostly employed in the process industries. Four driving units cover the whole spectrum of GK(P) process pumps, resulting in reduced inventory and interchangeability.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

FEATURES

End-suction centrifugal process pumps
Back pull out design
Top centerline discharge with foot-mounted and centerline volute casing
Cooling jackets are available to cool stuffing boxes for liquids with a temperature above 105°C.
ISO 2858 / DIN EN 22858 / ISO 5199

SPECIFICATIONS

Delivery size: up to 150 mm
Capacity up to 500 m3/hr, with a head of up to 150 meters.
Working pressure: 16–25 bar
Temperatures up to 180°C

APPLICATIONS

Acids/alkalis
Hydrocarbons and oils
Various process chemicals.
Food processing units

GO TO:

Canned Motor Process Pump - i-CM

Our i-CM process pumps are primarily used in chemical and process handling applications that are free of suspended solids particles. i-CM process pumps are suited for moving corrosive and toxic fluids.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

FEATURES

The i-CM pump is a sealless, glandless, and emission-free canned motor pump.
Pump with no seals and no glands
The integrated motor design makes it compact and lightweight.

SPECIFICATIONS

Delivery sizes range from 32 to 50 mm, with capacities ranging from 4 to 80 m3/hr and a head of up to 60 metres.
Working pressure: 16 bar.
Temperatures up to 90°C

APPLICATIONS

Liquefied gases include ammonia, freons, carbon dioxide, amines, vinyl chloride, ethylene oxide, and phosgene (>150°C), among others.
Chemicals that are aggressive, dangerous, explosive, hazardous, or flammable (such as sulphuric acid, nitric acid, hydrofluoric acid, hydrocyanic acid, ethanoic acid, and formic acid).

GO TO:

End Suction Process Pump - i-CP

Our End Section Process Pump i-CP pumps feature a horizontal, radially split, single-stage centrifugal end-suction volute with top centerline delivery. The impeller is of the enclosed kind. The bearing housing is equipped with a support foot. As part of the normal supply, pre-lubricated anti-friction sealed bearings are used to support the pump shaft. i-CP pumps are designed without a mechanical seal or gland packing system, ensuring zero leakage from the stuffing box. This function is achieved through the creative design of the shaft sleeve, expeller, and fluid arrester.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

POWERPLANT

WATER RESOURCES

FEATURES

Zero leakage pump is environmentally beneficial.
Highly energy-efficient.
Maintenance-free pump without mechanical seal or gland packing arrangement.
No periodic bearing lubrication is required.
Water does not have to be sealed or flushed
Self-venting design
Pump with a back pullout design.
Conforming to the ISO 2858 standard
Compact design.
sturdy but light in weight
Shaft is completely shielded from fluids.
Wide interchangeability of components

SPECIFICATIONS

At 1450 rpm

Rate of flow up to 180 m3/hr
Head up to 55 m

At 2900 rpm

Rate of flow up to 150 m3/hr
Head up to 85 m
Temperature – up to 95 °C

APPLICATIONS

Light chemicals include caustic soda, mild acids, and so forth.
Food and beverage industries (sugar, vegetable oils, etc.).
Other applications include hot water, brine, DM water, and lime water.

GO TO:

End Suction Process Pump - KPD

Our End Section Process Pump KPD/KPDQF/KPDJ process pumps are used to move a variety of chemical liquids. These process pumps are rigidly constructed and built with close tolerances. However, appropriate installation, operation, and maintenance are all necessary to assure trouble-free service. KPD/KPDQF/KPDJ process pumps are either gland-packed or mechanically sealed. KPD pumps have an enclosed impeller (with casing cover for heating/cooling arrangement). KPD-QF pumps use a semi-open impeller, whereas KPD-J pumps have a jacketed delivery, casing, and casing cover.

SECTORS OF APPLICATION:

TEXTILE

TYRE

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

FEATURES

Horizontal and single stage
Top center line delivery.
Oil-lubricated bearings and API flushing plan

SPECIFICATIONS

Delivery size: up to 350 mm
Capacity: up to 1550 m3/hr with a head of up to 225 meters.
Working pressure: 16–25 bar
Temperature (−) 50°C to 350°C.

APPLICATIONS

Process industries
Petro-chemical industry
Nuclear industry
Refineries, fertilizers, paper, sugar, and other businesses.
Air conditioning Distilleries
Water Treatment Plants

GO TO:

UTILITY PUMPS

End Suction Pump - DBxe

DBxe is dimensionally consistent with EN733/DIN24255. The DBxe pump series is energy-efficient and meets EN 16480's minimum efficiency index (MEI) of 0.7 or higher for water pumps. The DBxe water pumps are either gland packed or mechanically sealed. The DBxe pumps have a back-pull-out design, which allows the pump's rotating portion to be removed for inspection and maintenance without disrupting the pipe connections or motor via spacer-type coupling.

SECTORS OF APPLICATION:

COAL

IRRIGATION

POWER PLANT

WATER RESOURCES

FOOD AND BEVERAGE

TEXTILE

OIL AND GAS REFIENERY

FEATURES

The casing has axial suction and top center line delivery, with a self-venting design.
The impellers are statically and dynamically balanced.
The shaft is completely protected from the liquid being handled.
The stuffing box is sealed using gland packing or a mechanical seal (DIN/Cartridge).
Pre-lubricated grease Standard scope of supply includes sealed bearings, which are oriented clockwise from the driving end.
Pumps can be powered by an electric motor or engine.

SPECIFICATIONS

Delivery Size: 32 to 150 mm
Capacity: Up to 550 m3/hr Height: Up to 100 meters
Speed between 1450 and 2900 rpm, 1760 and 3500 rpm.
Working pressure is 16 kg/cm2 (MAWP).
Temperature ranges from -10°C to 90°C.
Sealing: Gland Packed (Standard), Mechanical Seal (Against Order)
Lubrication: Grease (Standard) and Oil (Against Order)

APPLICATIONS

Water supply
Sprinkler
Air conditioning
Industrial water
Swimming Pool Water
Hot water (up to 90°C)
Fire fighting
Drinking water or potable water
Cooling water.
Condensate
Clean juice in the sugar industry.
Solvent in the pharmaceutical sector.
Alcohol in the distillery.

MATERIAL

Pump casing and cover are cast iron, whereas the impeller is cast iron, bronze, or CF8M/CF8.
Wear Rings: Cast Iron or Bronze
Pump Shaft: CS 45C8/ASTMA-276 TYPE 410 Shaft Sleeve: Stainless Steel - ASTM A 276 Type 410 H

GO TO:

End Suction Pump - GK

End section GK pumps conform to ISO: 5199 & dimensionally are fully conforming to ISO 2858/EN: 22858. These pumps equip a horizontal back pullout design and radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti-friction deep groove ball bearings as a standard scope of supply. GK pumps are mainly used for clean and clear liquids, which are free from suspended solids particles.

SECTORS OF APPLICATION:

TYRE

OIL AND GAS REFIENERY

FEATURES

Highly energy-efficient.
Pump with mechanical seal and gland packing system.
Water does not have to be sealed or flushed
Self-venting design
Pump with a back pullout design.
Compact design and broad interchangeability of components
Shaft is completely shielded from fluids.

SPECIFICATIONS

Delivery size ranges from 65 to 125 mm.
Capacity ranges from 20 to 450 m3/hr, with a head of up to 60 metres.
Working pressure: up to 16 bar.
Temperatures up to 90°C

APPLICATIONS

Water supply, hot water and drinking water
Sprinkler and irrigation
Air conditioning
Industrial water
Swimming Pool Water
Firefighting
Cooling water.
Condensate
Clear juice.

GO TO:

End Suction Pump - CPHM

CPHM pumps have a back-pull-out construction, which allows the spinning portion of the pump to be removed for inspection and maintenance without damaging the pipe connections. Eight driving units cover the entire range of CPHM water pumps, saving inventory and allowing for part interchangeability. The CPHM water pumps are either gland packed or mechanically sealed.

SECTORS OF APPLICATION:

COAL

CHEMICAL AND PHARMACEUTICAL

POWER PLANT

MARINE AND DEFENCE

FOOD AND BEVERAGE

TEXTILE

OIL AND GAS REFIENERY

FEATURES

Conforms to DIN 24256/ISO 2858 specifications and features a back pull-out design.
Mechanical or gland-packed seal
50HZ/60HZ Availability

SPECIFICATIONS

Delivery size ranges from 20 mm to 200 mm (3/4 to 8).
Capacity: up to 750 m3/h (3300 US gpm).
Head up to 150 meters (480 feet).
Temperature: (−) 30°C to 90°C

APPLICATIONS

Air conditioning
Firefighting
Booster Services
Sprinkler system and irrigation

GO TO:

Mixed Flow Pump - MF

MF pumps are single-stage, horizontal spindle volute type foot-mounted end suction pumps having oil-lubricated ball bearings and a thrust bearing. These are low-head, high-capacity water pumps with horizontal or vertical delivery choices. MF water pumps come with semi-open mixed flow impellers. The MF-E and MF-X pumps use an enclosed mixed flow impeller.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Pumps with high capacity and a low head
Mechanical or gland-packed seal
50HZ/60HZ Availability
Option available in both horizontal and vertical delivery positions.

SPECIFICATIONS

Delivery size: 200 mm to 650 mm (8 to 26)
Capacity: up to 7000 m3/h (30,820 US gpm).
Head up to 30 meters (90 feet).
Temperature: 5°C to 140°C.

APPLICATIONS

Services include air conditioning, drainage, irrigation, and storm water.

GO TO:

End Suction Pump - DBL

DB big pumps are equipped with a back-pull-out design that allows the spinning unit of the pump to be removed for maintenance and repairs without disrupting the pipe connections or motor via spacer type couplings. Three drive units cover the whole range of the DB big pump, minimizing inventory and allowing for part interchangeability. These DBL water pumps are either gland packed or mechanically sealed, with a strong cast iron casing and are extremely efficient. DBL water pumps include a bronze impeller, which makes them easy to maintain, reliable, and long-lasting.

SECTORS OF APPLICATION:

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

FEATURES

Back-pull-out design
Mechanical or gland-packed seal
50HZ/60HZ Availability

SPECIFICATIONS

Delivery size ranges from 150 to 300 mm (6 to 12).
Capacity: up to 1900 m3/h (8866 US gpm).
Head up to 35 meters (112 feet).
Temperature: (-)10°C to 90°C

APPLICATIONS

Aquaculture, Water Supply, Irrigation, and Sugar Industries

GO TO:

End Suction Pump - DB

DB pumps have a back-pull-out construction, which allows you to remove the pump's rotating unit for inspection and repairs without damaging the pipe connections or motor by using a spacer type coupling. Three drive units cover the entire range of DB pumps, minimizing inventory and allowing for part interchangeability. The DB water pumps are either gland packed or mechanically sealed.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Conforms to DIN 24255
Back-pull-out design
Mechanical or gland-packed seal
50HZ/60HZ availability

SPECIFICATIONS

Delivery size ranges from 32 mm to 150 mm (11/4 to 6).
Capacity: up to 550 m3/hr (2422 US gpm).
Head up to 100 meters (320 feet).
Temperature (-): 10°C to 100°C

APPLICATIONS

Air-conditioning
Booster Service
Water circulation in industrial settings
Firefighting
Lift irrigation.
Mine water.
Pumping brines, oils, and other liquids.
Sprinkler systems

GO TO:

End Suction Pump - CE

CE pumps are single stage pumps with a back-pull-out design that allows for the removal of the pump's rotating unit for inspection and repairs without disturbing the pipe connections or motor via spacer type coupling. Four driving units cover the entire range of CE pumps, minimizing inventory and allowing for part interchangeability. The CE water pumps are either gland packed or mechanically sealed.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Conforms to DIN24256 and ISO 2858 standards. Features a single stage and back pull-out design.
Gland packed/mechanical seal.
Suitable for 3500 RPM.

SPECIFICATIONS

Delivery size: up to 125 mm (5)
Capacity of up to 660 m3/h (2906 US gpm).
Head up to 100 meters (320 feet).
Temperature (−) 10° C to 140° C.

APPLICATIONS

Air conditioning
Condensate water supply.
firefighting and booster services
Sprinkler systems can handle clear and turbid water up to 3000 ppm.

GO TO:

SOLID HANDLING PUMP

Solid Handling Pump - NK

Effluents, sewage, muddy, viscous, contaminated liquids containing suspended materials, in sugar plants, sewage pumping stations, as well as the chemical, fertilizer, pulp and paper, food, and steel industries

SECTORS OF APPLICATION:

SUGAR FACTORY

FEATURES

Pumps with a single stage, end suction, horizontal design that does not clog.
Available for vertical execution.

SPECIFICATIONS

Delivery size: up to 450 mm
Capacity: up to 3400 m3/hr with a head of 55 meters.
Temperature range: (−) 10°C to 140°C

GO TO:

Solid Handling Pump - SHM

SHM solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog pumps while SHS are vertical non-clog pumps used for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These solid handling pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. SHM solid handling pumps have standard grease lubrication, although oil lubrication is also available as an option. In case of SHS pumps, the lubrication is grease based. The complete range of SHM solid handling pumps is covered by four driving units, thereby reducing inventory and achieving interchangeability of parts.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Solid size: up to 105 mm
Gland packed/mechanical Seal
50/60 Hz availability
Available for vertical execution.

SPECIFICATIONS

Delivery size: up to 200 mm
Capacity up to 800 m3/hr, with a head of up to 90 meters.
Working pressure: up to 16 bar.
Temperature range: (−) 10°C to 140°C

APPLICATIONS

Sludge and Paper Pulp
Sewage and Waste Water
viscous liquids and fibrous materials
Contaminated process fluid.
Bagasse
Strained and unstrained juice
Power material slurries.
Sugar factory waste.

GO TO:

Solid Handling Pump - SHL

SHL solid handling pumps are single stage, single suction pumps with a back-pull-out configuration. These are horizontal, non-clog pumps. The SHL pump component is supported by a column pipe that also protects the transmission shaft. The impeller is a single suction type that is non-clog, free flow, and dynamically balanced, and can handle liquids including solids.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

horizontal shaft, single stage, single suction pumps having a back pull-out configuration.
50/60 Hz availability

SPECIFICATIONS

Our delivery size ranges from 250 mm to 900 mm, with a capacity of up to 13000 m3/hr and a head of up to 82 metres.
Temperature ranges from (-) 10°C to 90°C

APPLICATIONS

Contaminated process liquids, such as sugar plant waste and trade liquors, can be used to handle liquids containing suspended solids or pulpy material in the paper industry.
viscous liquids or granular material slurries

GO TO:

SPLIT CASE PUMPS

Hydro Stream Thru-Bore LLC Series - Horizontal Split Case Pump – HL

HL pumps have a horizontally axially split casing and can be either single or two-stage. HL pumps are either double or single suction, having a horizontal shaft and a detachable stuffing box. The impeller is precisely balanced by a double or single suction.

SECTORS OF APPLICATION:

IRRIGATION

POWER SUPPLY

WATER RESOURCES

FEATURES

Excellent hydraulic and overall efficiency.
Good suction performance.
Low NPSH need.
Low upkeep.

SPECIFICATIONS

Delivery size: up to 400 mm
Capacity up to 1800 m3/hr, with a head of up to 120m.

APPLICATIONS

Water supply Irrigation
Power plants

GO TO:

Split Case Pump - UP/UPL/UPH/UP(T)

The UP series are horizontal split casing pumps with suction and discharge nozzles and supporting feet cast integrally into the lower half casing. This design allows the spinning unit to be removed for inspection and maintenance by simply removing the upper half casing, leaving the alignment, pipe connection, and prime mover intact.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Mechanical or gland-packed seal
50HZ/60HZ Availability
Excellent suction performance with low NPSH and vibration-free operation.

SPECIFICATIONS

Delivery size: up to 1220 mm
Capacity: up to 40,000 m3/hr with a head of up to 220 metres.

APPLICATIONS

Air-conditioning
Firefighting Irrigation
Paper, sugar, and textile mills
Power plants
Water supply

GO TO:

Split Case Pump - SCT - Extended

SCT extended pumps are single-stage pumps with horizontally and axially split casings. SCT extended pumps are available in both double and single suction configurations, with a horizontal shaft and detachable stuffing box. The impeller is precisely balanced by a double or single suction.

SECTORS OF APPLICATION:

SUGAR FACTORY

WATER RESOURCES

OIL REFINERY

FEATURES

Pump axis: horizontal or vertical
Mechanical or gland-packed seal
50HZ/60HZ Availability

SPECIFICATIONS

Delivery size: up to 350 mm
Capacity: up to 4000 m3/hr with a head of up to 240m.
Temperature (-): 10°C to 100°C

APPLICATIONS

Air conditioning and refrigeration systems
Fire protection systems and mining
Petroleum refineries
Water/liquids with little contaminants.

GO TO:

Split Case Pump - UP/UPL/UPH/UP(T)

SCT pumps are single-stage pumps with horizontally and axially divided casings. SCT pumps are either double or single suction, with a horizontal shaft and a detachable stuffing box. The impeller is precisely balanced by a double or single suction.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Pump axis: horizontal or vertical
Mechanical or gland-packed seal
50HZ/60HZ Availability

SPECIFICATIONS

Delivery size: up to 250 mm
Capacity: up to 1100 m3/hr with a head of up to 115m.

APPLICATIONS

Air conditioning and refrigeration systems
Fire protection systems and mining
Petroleum refineries
Water/liquids with little contaminants.

GO TO:

Split Case Pump - i-HT

i-HT axially split case centrifugal pumps are available in single and double stage configurations, with a maintenance-friendly design and high efficiency. All single stage pumps are outfitted with a double suction impeller. The i-HT split case pump features an externally removable type bearing housing, a DIN cavity mechanical seal, an impeller nut and sleeve arrangement, and quick wear ring installation. The i-HT horizontally split case pumps are easy to maintain.

SECTORS OF APPLICATION:

POWER SUPPLY

WATER RESOURCES

OIL REFINERY

FEATURES

Highly efficient with reduced operating costs.
Features include compact size, low downtime, and easy repairability.
Low prime mover costs.
Lowest pumping - project costs
Dual drive to save downtime.

SPECIFICATIONS

Delivery dimensions up to 300 mm
Capacity: up to 1300 m3/hr with a head of up to 250 meters.
Temperature ranges from 8° C to 90° C.

APPLICATIONS

Primary and secondary HVAC applications
High-pressure-boosting system
Dewatering in mines
Cooling tower
Recirculation
Industrial utility water application.
Desalination
Water supply
Paper plants
Steel plants (for high-pressure injection).
Sugar plants

GO TO:

Split Case Pump - DSM/DSMT

DSM/DSMT split case pumps have two stages and are horizontally placed with an axially split casing. The split case architecture allows for the removal of the pump's rotating portion without affecting pipe connections or alignment.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Mechanical or gland-packed seal
50HZ/60HZ Availability
Excellent suction performance with low NPSH and vibration-free operation.

SPECIFICATIONS

Delivery size ranges from 50 to 150 mm.
Capacity: up to 470 m3/hr, with a head of up to 180 meters.
Temperature ranges from 8°C to 90°C.

APPLICATIONS

HVAC systems include both primary and secondary air conditioning.
Heating Ventilation
Firefighting Irrigation
Mine Drainage
Power plants
Water supply

MULTI STAGE PUMPS

GO TO:

Multi-stage Side Channel Pump - CF

Multistage side channel CF pumps can handle aerated liquids. CF pumps have been designed specifically for heavy-duty use in all industrial industries. Under even the most difficult operating situations, the pump can handle clean, slightly contaminated, or aggressive liquids without issue. The multi-stage side channel CF pump is highly dependable and simple to maintain. CF pumps are extremely important in regions where high security and rapid service are required.

SECTORS OF APPLICATION:

MARINE AND DEFENCE

FEATURES

Capable of handling liquid/gas combinations.
Low NPSHR values allow high suction lift or operating close to the evaporation temperature.
Conforms to DIN 24254 with DIN 2501 PN 40 flanges and a multi-stage, modular structure.
Features include self-priming and a mechanical/gland packed seal.
Electrical/engine drive.

SPECIFICATIONS

Delivery size: up to 50 mm
Capacity ranges from 0.3 to 35 m3/hr, with head sizes ranging from 5 to 350 metres.
Temperature range: (-) 40°C to + 220°C (660 series: up to + 180°C).
Working pressure: 40 bars.

APPLICATIONS

Firefighting
Booster Service
Mine dewatering
Boiler feed and naval engineering
Sprinkler irrigation.
Air conditioning and refrigeration installation
Descale LPG and other petroleum products.
Chemical and Process Industry

GO TO:

Multi-stage Pump - RKB/RKBF/RKBK

RKB series is a horizontal multistage centrifugal pump. RKB/RKBF/RKBK horizontal multistage centrifugal pumps are side suction pumps with vertical delivery and diffuser type casing. RKB horizontal multistage centrifugal pump series impellers are of radial flow type provided with balancing holes. RKB/RKBF/RKBK horizontal multistage centrifugal pumps have standard grease lubrication, suitable for coupling with electric motors

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Gland-packed/mechanical seal
Diffuser enclosure with a ring section
Stuffing box cooling for high-temperature applications.
Available in vertical configuration.
Optional orientation is offered for suction branch.
Hydraulic thrust balancing through holes
The multi-cutlet function allows the pump to be used at various delivery pressures.
50/60 Hz availability

SPECIFICATIONS

Delivery size: up to 250 mm
Capacity: up to 850 m3/hr with a head of up to 850 metres.
Working pressure: 40-64 bar
Temperature (-40 °C to 140 °C)

APPLICATIONS

Fire-fighting
Booster Service
Mine dewatering
Boiler feed, sprinkler irrigation, and descaling.

SUMP PUMPS

GO TO:

Vertical Non-clog Solid Handling Sump Pump - SHS

SHS solid handling pumps are vertical, non-clog pumps designed for wet pit applications. The pump unit is suspended from a column pipe, which also protects the transmission shaft. SHS Solid handling pumps are available in column lengths of up to 6.5 metres. SHS solid handling pumps are built to precise tolerances and stringent standards.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Vertically immersed, single stage, single suction pump.
Vertical shaft configuration.
Side discharge pump for space-saving installation.

SPECIFICATIONS

Delivery size: up to 300 mm
Capacity: up to 1500 m3/hr with a head of up to 90 meters.
Temperature ranges from (-) 10°C to 90°C

APPLICATIONS

Liquids that include suspended solids
Sludge and pulpy substance.
Industrial waste handling
Liquids with fibrous and powdery particles
Coal tar and effluents

GO TO:

Solid Handling Sump Pump - KPDS

KPDS sump pumps are utilized in process applications. It has numerous applications in the chemical processing industries. KPD-S sump pumps are built to tight tolerances and stringent standards.

SECTORS OF APPLICATION:

TEXTILE

COAL

FEATURES

Vertically immersed, single stage, single suction pump.
Vertical shaft configuration.
Side discharge pump for space-saving installation.

SPECIFICATIONS

Delivery size ranges from 20 to 200 mm.
Capacity ranges from 0.5 to 750 m3/hr, with a head of up to 150 meters.
Temperature up to 90 °C

APPLICATIONS

Petrochemicals, refineries, fertilizer, and energy industries
Transfer and circulation of acids, alkalis, solvent oils, and so on.
Highly alkaline and highly acidic liquids (with an enclosed impeller)
Crystallizing liquids, liquids with suspended particulates, and industrial clean effluent.

VERTICAL INLINE PUMPS

GO TO:

Vertical Inline Long Coupled Pump - KW-LC

vertical inline pumps are vertical single-stage in-line centrifugal pumps of the close-coupled type. These are designed for circulation of liquids in heating and air-conditioning systems. Top pull-out facility permits removal of stuffing box, and impeller without disturbance to casing or suction/discharge pipework. It includes a drain at the bottom. The dynamically balanced impeller minimises vibration and increases bearing life.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

Features

Vertical inline long connected by an axially split stiff coupling.
Suction and delivery nozzles are cast integral to the volute and are in line. Suction and delivery flanges are cast integrally.
The volute is built with smooth fluid flow pathways.
The pump case includes machined surface and mounting holes for easy pump installation.
The impeller is an enclosed kind. It is dynamically balanced, ensuring the pump's smooth operation.
Pump Shaft is engineered to withstand the most demanding conditions. The shaft's critical speed is sufficiently higher than its operational speed.
Efficient water pumps with MEIs more than 0.7, in compliance with Eco-design criteria.

Specifications

Delivery size is up to 200 mm.
Discharge Capacity (Q): 550 m3/hour (150 LPS)
Total Head: 52 meters.
Speed (nominal): 1450 RPM
Suction Pressure: 12 bar, subject to maximum working pressure of 16 bar. Working pressure: 16 bars.
Temperature: maximum of 90°C.

Applications

Water supply
HVAC
Air conditioning
Hot water up to 90 °C
Drinking Water
Cooling water and Firefighting uses.

GO TO:

Vertical Inline Pump - INIL

INIL pumps are intended for non-explosive clean, thin liquids with no solid particles. KBL vertical inline pump volute casing is built to withstand pipework stress and features a radial suction and discharge port. The enclosed impellers are dynamically balanced and have an extra smooth surface finish to ensure maximum efficiency.

SECTORS OF APPLICATION:

MARINE AND DEFENCE

FEATURES

Computer-aided hydraulic design.
Impellers are enclosed kind.
Hydraulic balancing holes
The high-tensile steel shaft is sturdy in design and precisely machined.
The stuffing box is sealed with a finely developed mechanical seal.

SPECIFICATIONS

Delivery size: up to 200 mm
Capacity up to 500 m3/hr, with a head of up to 150 meters.

APPLICATIONS

Air conditioning for sea and cold water
Fire fighting
Transfer of fuel oil, light lubricant oil, diesel oil, and so on.
Distilling plant feed systems.
Portable water supply.

VERTICAL TURBINE PUMPS

GO TO:

Large Vertical Turbine Pump - BHR/BHQ/BHM/BHK/BHMa/BHA

BHR/BHQ/BHM/BHK/BHMa/BHA pumps are firmly built to assure vibration-free performance. BHR/BHQ/BHM/BHK/BHMa/BHA pumps are designed to provide a smooth input of water while minimizing losses. The hydraulic design of these pumps is being revised as part of our ongoing R&D efforts to fulfill the relevant better efficiency and lower submergence standards, while also taking into account other parameters such as high reliability and optimum system design. BHR/BHQ/BHM/BHK/BHMa/BHA pumps come in single or multi-stage configurations, including bowl, column, and driving unit assemblies.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Vibrationless performance
Low submergence.
No priming is necessary.
Dry pit/wet pit configuration is offered.
Direct drive or right angle gear drive
Pull-out or non-pull-out for the impeller and bowl.
Gland packed/mechanical seal
50Hz/60Hz availability

SPECIFICATIONS

Delivery size: up to 2200 mm
Capacity: up to 55000 m3/hr with a head of up to 240 meters.

APPLICATIONS

Lift irrigation (vertical or inclined mounting)
Water supply
Circulating water in nuclear and thermal power plants
Various applications in steel, cement, and refineries.
Handling seawater on offshore rigs and dry docks.
Firefighting
Flood Control
Condensate extraction.

GO TO:

Small Vertical Turbine Pump - VEP

The VEP Pump series of Vertical Turbine Pumps (VT) consists of three functional units: the pump unit, the column unit, and the head unit. VEP pumps are intended for a maximum operating speed of 1800 RPM. These pumps are designed to operate at a 60 Hz supply frequency. When viewed from the top, all pump models are designed to rotate anticlockwise.

SECTORS OF APPLICATION:

IRRIGATION

POWER SUPPLY

FEATURES

Reliable, efficient and cost-effective.
Compact design allows for smaller apertures at the pump floor.
Cast discharge head provides increased stability.
Serrated wear rings reduce wear, increase efficiency, and promote sustainability.
The hollow shaft motor eliminates the need for a separate thrust bearing on the discharge head. This reduces the need for cooling coils, reducing the possibility of piping leakage.
Compact design, sandwiched bearing spiders allow for proper alignment of bearings with shafts.
Compact stuffing box assembly is straightforward to install and maintain.

SPECIFICATIONS

As per customer order.

APPLICATIONS

Irrigation
Water supply
Firefighting
River water intake
General industry
Cooling water.
Seawater Application

NON CLOG SUBMERSIBLE PUMPS

GO TO:

Non-clog Submersible Pump - NS

The NS submersible pump is designed for sewage and seepage applications. NS submersible pumps are single-stage, single-suction pumps. NS submersible pump impellers are non-clog type, allowing solids to pass smoothly and catering to a wide range of applications. NS pumps are available in both stationary and transportable configurations. The stationary setup comes with a pump connector unit, which is attached to the pump support bracket using a rubber diaphragm to provide a leak-proof joint.

SECTORS OF APPLICATION:

CHEMICAL AND PHARMACEUTICAL

SUGAR FACTORY

WATER RESOURCES

FOOD AND BEVERAGE

MARINE AND DEFENCE

OIL REFINERY

TEXTILE

TYRE

COAL

MARINE AND DEFENCE

FEATURES

Non-clog two- or single-vane enclosed impeller.
Solids can be up to 85 mm in size and sealed mechanically or gland packed.
50 HZ/60 HZ Availability

SPECIFICATIONS

Delivery size: up to 300 mm
Capacity up to 1800 m3/hour
Head up to 90 meters.
The maximum allowable solid size is 300 mm

APPLICATIONS

Screened sewage
Raw sewage
Contaminated effluent
Industrial waste water
Stormwater, trench, and tunnel water
Drain water, mine water, and so forth.

GO TO:

Non-clog Submersible Pump - i-NS

The i-NS submersible pump is designed for sewage and seepage applications. i-NS submersible pumps are single-stage pumps with a non-clogging impeller that allows particles to pass smoothly, making them suited for a variety of applications. i-NS pumps are available in both stationary and transportable configurations. The stationary configuration includes a pump connector unit, which is linked to the pump support bracket and sealed with a rubber diaphragm to provide a leak-proof junction.

SECTORS OF APPLICATION:

WATER RESOURCES

POWER PLANT

FEATURES

Impellers are available with two or more vanes in semi-open and enclosed types to suit to a wide range of application areas.
Permissible solid size up to 125 mm.
Double mechanical seal with back-to-back arrangement to ensure no entry of pumping liquid into the motor.

SPECIFICATIONS

Delivery size: up to 150 mm
With a capacity of up to 300 m3/hr and a 50-meter head,
The maximum allowable solid size is 125 mm

APPLICATIONS

Contaminated effluent
Industrial waste water
Storm Water
Trench and tunnel water
Drain or saline water
Drainage water
Sewage water

SPECIAL ENGINEERED PUMPS

GO TO:

Metallic Volute Pump - MVP

Metallic Volute Pumps (MVPs) are utilized for high-capacity water handling applications. The MVP pump has a metal volute casing. The MVP pump is frequently used for cooling water in thermal and nuclear power facilities.

SECTORS OF APPLICATION:

IRRIGATION

POWER PLANT

FEATURES

High reliability
Design simplicity.
Superior operating performance.
Vibrationless performance
Low submergence.
Lowest maintenance costs.

SPECIFICATIONS

Delivery size: up to 5000 mm
Capacity ranges from 10 to 120,000 m3/hr, with a head of 3 to 350 metres.
Temperatures up to 120°C.

APPLICATIONS

Thermal and nuclear power plants.
Water supply pumps
Irrigation pumps
Flood control, storm water, and dry docks

GO TO:

Condensate Extraction Pump - BHRc / RKB-CV

The Condensate Extraction pump series is commonly used for condensate extraction in thermal and nuclear power facilities. CEP pumps are the best solution in these categories due to their excellent efficiency and low NPSHR.

SECTORS OF APPLICATION:

POWER PLANT

FEATURES

Pump having an axial thrust balancing system.
Pump includes anti-friction type axial thrust bearings with oil sump/grease lubrication.
Pump has segmental pad type thrust and plain radial bearings with oil sump lubrication.
Pump comes with cardan shafts or flexible tubular shafts as an option.
Pump equipped with a reverse rotation protection device.
Hydraulic design is continuously updated by our research and development efforts to fulfill the high efficiency and low NPSHR criteria.

SPECIFICATIONS

Delivery size: up to 500 mm
Capacity ranges from 10 to 2200 m3/hr, with a head of 3 to 350 metres.
Temperatures up to 120°C.

APPLICATIONS

Handling steam condensate in different power plants.
Handling steam condensate in industrial facilities

GO TO: